C5/C6 Corvette Tube Rear Kit

We've finally reached this point in drifting! A fully ready to go tube rear end with a removable inner structure, easily replaceable bash bars, and a jack point. This kit was CAD designed from OEM Chevrolet Models, no scans here!

This tube rear end is designed to be used on fully dedicated drift cars. The use of a fuel cell is not mandatory since C5/C6's have saddle tanks from the factory.

If you're wondering how the heck you even do this, go look under your C5/C6 and look at the rear cradle mount on the chassis. This mount is kept intact and is what we use to set the plate distance, making it super easy to mark and cut the stock rails off!

• Double 1.66" OD, .120" wall tube as the main structure with stitch welding between the tubes. Strong stuff!
• Chassis mount plate holes are outside of the frame rails, so you can use the nuts/bolts as sent or weld nuts on to the back side of the plates.
• Bash bars are the same left and right, meaning less spares to carry!
• Jack point integrated into the tube rear structure, including a plate that fits perfectly into 2.5 ton jacks so your car won't slip off!
• Hardware to mount the structure to the chassis and the hardware to mount bash bars is included.

This kit can be purchased 4 ways depending on your fab skills! 

- Loose parts with bent main tubes and bash bars

- Complete welded inner structure

- No Body Supports (make your own)

- With Body Supports that allow the use of 1/4 turn fasteners (Dzus fasteners not included, Supports do not come welded and will need final fit/finish) 

**This tube rear structure is intended to be welded on by a professional. This will not weld on with a harbor freight 110 welder! Accurate measurements, Leveling, cutting and welding is still needed to install this. We just took the guess work and fab cost out of the equation for you! Warranty on these parts is very much limited to fit/finish before installation. We are not liable for incorrect installation or crash protection.

***THIS TUBE REAR IS FOR TRACK / OFF ROAD USE ONLY. THIS IS MOST CERTAINLY NOT DOT APPROVED!